Any of these hand tools makes great gifts!
Don't forget to also check out our
Scissors and Cutting Tools page!

C.S. Osborne Marking Chalk
This chalk is clay based and thus it is much easier to erase. Also works on glass and vinyl that other chalks do not. Due to the shape of this chalk a sharp marking edge is maintained.
Box of 12 contains : 8 white, 2 yellow, 1 red, 1 blue

$12.95 each

 

 

Seam Ripper
Any good sewer is a good seam ripper!  Treat yourself to this professional quality seam ripper.  Larger than most, perfect for heavier outdoor applications.  

$1.75 Each

 

Fastrack
If you've ever pulled the drawstring out of anything and went through the agonizing process of trying to re-thread it, then the Fastrak is for you!  This tool makes threading drawstrings through a waistband or top casing on a stuff sack, easy!  

$4.50 Each

 

Awl For All

Awl For All  
This lock stitch sewing awl is the perfect hand sewing tool for infield repairs of bags, backpacks, luggage, upholstery, footwear, saddles, awnings, tents and more!  Comes with one reel thread, two different size needles and a wrench/screwdriver.  All needles and tools fit neatly into the handle compartment.   

$11.95 Each

 

 

EberleCrafts by Mundial: Professional Hobby and Zipper Shortening Tools 
EberleCrafts Hobby Tools: superior performance at an affordable price! Perfect for all of your beading, jewelry making, floral crafting and zipper customization needs! These tools will make zipper shortening even easier!  A must for any avid sewer.  Also check out our "All about Coil & Molded Tooth Zippers" information sheet below for detailed directions on how to make zipper alterations.

Made with Chrome Vanadium with Spring-Action Handles and Comfortable Rubber Grips!

F19 Long Nose Pliers 5"
Use long nose pliers to bend and shape wire. The long, thin nose is ideal for grasping small objects in confined areas. Serrated jaws guarantee a firm grip. Perfect multi-purpose tool! Use it to pull out Vislon teeth or crimp on top stops.
$6.95 Each
F21 Universal Pliers 4.5"
Use for all general crafting purposes. Serrated jaws guarantee a firm grip. Wide tip makes this tool great for crimping on top stops and pulling out teeth.
$6.95 Each
F22 Nipping Pliers 4.25"
Use nipping pliers to cut soft wire (including coil teeth!). Great for working with electronics and jewelry making. Highly recommend for zipper tooth extraction!
$6.95 Each
F23 Diagonal Cutting Pliers 4.5"
Use diagonal cutting pliers to cut lightweight wire, silk flower stems and coil zipper teeth. Great for floral crafts, jewelry making, beadwork and zipper customization. Serrated jaws guarantee a firm grip. Perfect for customizing coil zippers!
$6.95 Each
F24 Bent Nose Pliers 5"
Use bent nose pliers to grasp hard-to-reach objects. The long, thin nose is angled for easy access to narrow areas. Serrated jaws guarantee a firm grip. The angled design makes crimping on top stops a breeze!
$6.95 Each
F25 Flat Nose Pliers 5"
Use flat nose pliers to make sharp bends and angles in craft wire. Serrated jaws guarantee a firm grip. Also great for putting on top stops with its wide tip!
$6.95 Each
 
Type  


C.S. Osborne Set-It-Yourself Snap Kit 
Everything you need to set snap fasteners. Kit includes 6 complete nickel-plated brass snap sets, setting die and setting anvil. Tooled metal construction insures a long lasting tool. Comes with complete instructions. Two size snaps available! 

When setting snaps, use a hard surface under the grommet anvil. Our Mini Anvil works great for this application! To enhance the life expectancy of your snap setter use a rawhide hammer or wooden mallet, not a steel hammer.

Size: Price:
Durable Dots $14.95 Each
Baby Dots $14.95 Each
 
Size  


C.S. Osborne Self Aligning Snap Setter 
The C.S. Osborne Self Aligning Snap Setter spells quality! Plus the self aligning set up makes for easy use. 

When setting snaps, use a hard surface under the grommet anvil. Our Mini Anvil works great for this application! To enhance the life expectancy of your snap setter use a rawhide hammer or wooden mallet, not a steel hammer.

Size: Durable Dots

$19.95 Each

 
Size  

Durable 3 Piece Snap Setter 
The highest quality handheld snap setter available.  This setter is machined to the highest quality standards and has both a button and eyelet anvil to insure a perfectly set snap. 

$29.95 Each

 

Press-N-Snap Tool 
This professional quality setting tool comes with snap button, socket, eyelet and stud dies and #1 plain washer grommet dies.  The heat-treated cast aluminum body makes this tool both lightweight and durable.  It is portable, versatile and easy to use.  Capable of setting numerous brands of fasteners.  For availability of other types of dies, email us.

Size: Durable Dots

Make snap setting even easier with Press-N-Snap Bench Mount

$149.95 Each

 

Press-N-Snap Bench Mount
For those who want to use the Press-N-Snap Tool as a bench machine, we offer a bench mount.  It can be mounted either vertically or horizontally on a work bench.

$29.49 Each

 

C.S. Osborne Plain Washer Grommet Setter
This is a professional quality grommet setter that will stand up to the test of time.  Hardened steel insures long life for these setters, even in high use commercial applications.   

When setting grommets, use a hard surface under the grommet anvil. Our Mini Anvil works great for this application! To enhance the life expectancy of your grommet setter use a rawhide hammer or wooden mallet, not a steel hammer.

Punch holes before setting grommets with one of the following tools: Drive Hole Punch, Revolving Hole Punch or Screw Hole Punch.

For use with Grommets and Snaps.

Size #00 #0 #1 #2 #3 #4
Diameter of hole when set 3/16" 1/4" 5/16" 3/8" 7/16" 1/2"
Price $44.99 $45.99 $47.99 $49.99 $57.99 $61.99
 
Size  

C.S. Osborne Spur Grommet Setter
This is a professional quality grommet setter that will stand up to the test of time.  Hardened steel insures long life for these setters, even in high use commercial applications.   

When setting grommets, use a hard surface under the grommet anvil. Our Mini Anvil works great for this application! To enhance the life expectancy of your grommet setter use a rawhide hammer or wooden mallet, not a steel hammer.

Punch holes before setting grommets with one of the following tools: Drive Hole Punch, Revolving Hole Punch or Screw Hole Punch.

For use with Spur Washer Grommets.

Size #0 #1 #2 #3 #4
Diameter of hole when set 9/32" 13/32" 7/16" 8/16" 9/16"
Price $45.99 $47.99 $49.99 $57.99 $61.99
 
Size  

 

C.S. Osborne Midget Plain Washer Grommet Setter
This die is perfect for intermediate usage, designed for use where more grommets are going to be set than the C.S. Osborne Gromeet Kit but less than the Professional Setters listed above.

When setting grommets, use a hard surface under the grommet anvil. Our Mini Anvil works great for this application! To enhance the life expectancy of your grommet setter use a rawhide hammer or wooden mallet, not a steel hammer.

Punch holes before setting grommets with one of the following tools: C.S. Osborne Drive Hole Punch, C.S. Osborne Belt Punch, C.S. Osborne Revolving Hole Punch or Screw Hole Punch.

Size #00 #0 #1 #2 #3 #4
Diameter of hole when set 3/16" 1/4" 5/16" 3/8" 7/16" 1/2"
Price $14.95 $15.95 $16.95 $17.95 $18.95 $19.95
 
Size  
 

C.S. Osborne Grommet Kits
This kit has everything needed to set grommets, complete with easy to follow instructions. Although this kit is not intended for commercial use, with a name like C.S. Osborne you know it is a quality product that with reasonable care should last an indefinite period. Kit includes grommet die, punch, cutting board and grommets. Sizes zero-zero through one include 48 grommets. Sizes two through four include 24 grommets. Available in brass, nickel plated brass finish or black anodized brass finish.

When setting grommets, use a hard surface under the grommet anvil. Our Mini Anvil works great for this application! To enhance the life expectancy of your grommet setter use a rawhide hammer or wooden mallet, not a steel hammer.

When using the hole punch that comes with this grommet kit, we highly recommend using the Self Healing Cutting Pad. Otherwise it is recommended to use corrugated cardboard on top of of the wooden block provided with kit. This will increase the life expectancy of the hole punch.

Need more grommets? Check out our refill packages!

For use with Plain Washer Grommets.

NEW! - Kits now available with Black Anodized Finish

Size #00 #0 #1 #2 #3 #4
Diameter of hole when set 3/16" 1/4" 5/16" 3/8" 7/16" 1/2"
Brass Kit $16.99 $17.49 $18.49 $19.49 $20.49 $22.49
Nickel Kit $17.49 $17.99 $18.99 $19.99 $20.99 $22.99
Black Kit $18.99 $19.49 $20.49 $21.49 $22.49 $24.49
 
Finish  
Size  

C.S. Osborne Heavy Duty Grommet Kits -- NEW!
A complete and intermediate kit for consumer use. Each kit consists of a midget grommet setter, a belt punch, three dozen brass plain grommets and washers, a small cutting board and complete instructions!

When setting grommets, use a hard surface under the grommet anvil. Our Mini Anvil works great for this application! To enhance the life expectancy of your grommet setter use a rawhide hammer or wooden mallet, not a steel hammer.

When using the hole punch that comes with this grommet kit, we highly recommend using the Self Healing Cutting Pad. Otherwise it is recommended to use corrugated cardboard on top of of the wooden block provided with kit. This will increase the life expectancy of the hole punch.

Size #00 #0 #1 #2 #3 #4
Diameter of hole when set 3/16" 1/4" 5/16" 3/8" 7/16" 1/2"
Brass Kit $24.49 $24.99 $25.99 $26.99 $27.99 $29.99
 
Size  

 

Eyelets   
Eyelets are available in brass, nickel, and black finishes.  They are sold in packages of 200 or 1,000.  Eyelets require the Eyelet Pliers for setting.  3/16" I.D.

Brass or Nickel Plated 200 $8.99/pkg
Black 200 $11.49/pkg
Brass or Nickel Plated 1,000 $29.99/pkg
Black 1,000 $39.99/pkg
Eyelet Pliers    
 
Package  

C.S. Osborne Drive Hole Punch   
This professional quality tool cuts holes for grommets.  The solid heavy-duty construction makes this a great choice. 

This tool should be used with the Self Healing Cutting Pad. The use of wooden or rawhide mallet is recommended. Steel hammers are not recommended.

Set grommets with one of the following tools after punching your hole: C.S. Osborne Midget Plain Washer Grommet Setter, CS Osborne Grommet Kits or Press-N-Snap Tool.

Size #00 #0 #1 #2 #3 #4
Diameter of hole when set 3/16" 1/4" 5/16" 3/8" 7/16" 1/2"
Price $22.49 $22.95 $23.49 $23.95 $24.49 $27.95
 
Size  

C.S. Osborne Belt Punch   
Hardened cutting edge and milled clearing hole, this is a cost effective hole punch suitable for consumer use

This tool should be used with the self healing cutting pad. The use of wooden or rawhide mallet is recommended. Steel hammers are not recommended.

Size #00 #0 #1 #2 #3 #4
Diameter of hole when set 3/16" 1/4" 5/16" 3/8" 7/16" 1/2"
Price $8.49 $8.99 $9.49 $9.99 $10.49 $10.99
 
Size  

Screw Hole Punch    
This unique hole punch works by pushing down on the molded wooden handle which creates a powerful turning motion to easily cut through many materials.

This tool should be used with the self healing cutting pad

Hold sizes are:  5/64", 3/32", 1/8", 5/32" 13/64".  

$31.95 each

 

C.S. Osborne Revolving Hole Punch   
This hole punch has six settings that are easily switched so you can make the size hole you need! Tip: if you're having trouble getting the punch to go all the way through the fabric, use corrugated card board behind your fabric.

This tool should be used with the self healing cutting pad

Set grommets with one of the following tools after punching your hole: C.S. Osborne Midget Plain Washer Grommet Setter, Grommet Kits or Press-N-Snap Tool.

Sizes are 3/16", 5/32", 1/8", 7/64", 3/32", 5/64".  

$18.99 each

 

Common Sense Eyelet Hole Punch
One of the hardest parts of using common sense fasteners is cutting the oblong hole and the four holes for the prong to fit through.  This punch does all of it at one time.  A great way to save time and frustration.  This tool should be used with the self healing cutting pad below. To enhance the life expectancy of your tool use a rawhide hammer or wooden mallet, not a steel hammer.

$55.99 each

 

C.S. Osborne #89.5: Barrel Shaped Hickory Mallet    
When setting snaps or grommets, it is highly recommended to use a wooden or rawhide mallet. The Osborne #89.5 Hickory Mallet is an excellent choice! Made of second growth lacquered hickory, carefully finished and well balanced.

Size No.

Diameter of
face (in)
Length of
head (in)
Length of
handle (in)
Weight
each (oz)
2 1/2     2 3/8 5 1/2 10 1/2 16

$18.99 each

 

C.S. Osborne #196: Rawhide Mallet with Solid Head    
When setting snaps or grommets, it is highly recommended to use a wooden or rawhide mallet. The Osborne #196 Rawhide Mallet with solid head is an excellent choice! The head of this light-weight mallet is made entirely of rolled water buffalo rawhide. Handle is white hickory. It is recommended for many jobs where the user wishes to avoid scaring.

Size No.

Diameter of
face (in)
Length of
head (in)
Weight
each (oz)
1 3/4 3 3/8 8

$36.99 each

 

Self Healing Cutting Pad
Now available in two sizes! This cutting pad is a must for using punch type hole cutters.  Made of resilient vinyl plastic, these tough cutting pads allow the cutting die to easily cut through the fabric and into the pad.  Should be used on a solid base like the Mini Anvil below.

3.5" x 3.5" x .25" $7.49 ea
10" x 10" x .5" $29.99 ea
 
Size  

Mini Anvil
For the best results when setting snaps, grommets or using cutting tools, a steel surface should be used to pound on.  If space is a problem, the Mini Anvil is the answer.  5.5" long x 3.5" tall.

$14.95 each

 

Touro ALLSTAR Mini Cutting Machine
After a few months of not being able to find a source for this amazing machine, it's back in stock! Plus this item is better than ever, with quality that just stands out!

Don't be fooled by the term "Mini". This cutter will cut through several layers of fabric up to 9/32" thick (and up to 10 mm thick neoprene like butter!). It is a huge time saver for small manufacturers, hobby sewers and people with arthritic hands.  Includes two-inch six-sided blade, built-in sharpener, sharpener stone, two extra brushes and more.

$199.95 ea.

 

Weller 40 Watt Hot Knife 
Until you buy one of these you may not understand how useful it can be!  This hot knife is perfect for cutting and sealing cording, webbing, and synthetic fabrics.  Make your projects more durable so that they last longer.  

$38.95/each
Replacement Tips $10.95/each

 
Choose  

2" Hot Box Webbing Cutter
This webbing/rope cutter will make a fast job of cutting and sealing webbing or any synthetic material up to 2" wide.  It is fast and easy to use so it will speed up your production time. 

$134.95 /each
Replacement Blade $26.95 each

 
Choose  

Don't forget to Add us to your Favorites!

Outerwear Patterns Grommets Sunbrella Marine Fabric Water Resistant Fabric Sunbrella Marine Fabric Outdoor Fabrics Sunbrella