Grommets and Tools!
Check out our grommets and the tools necessary to set them!

 


Plain Washer Grommets in Brass, Nickel and Anodized Black

Spur Grommets in Brass and Nickel


Grommet Refills

C.S. Osborne Plain Washer Grommet Setter

C.S. Osborne Spur Grommet Setter

C.S. Osborne Midget Plain Washer Grommet Setter

C.S. Osborne Grommet Kits

C.S. Osborne Heavy Duty Grommet Kits

Press-N-Snap Too
 
Press-N-Snap Bench Mount

C.S. Osborne Drive Hole Punch

C.S. Osborne Belt Punch

C.S. Osborne Revolving Hole Punch

Screw Hole Punch

Hickory Mallet

Rawhide Mallet

Self Healing Cutting Pad

Mini Anvil

Shown in Brass Plain Washer


Shown in Nickel Plain Washer

Plain Washer Grommets
144 washers and grommets per gross. 100% solid brass grommets available in brass, nickel plated and anodized black finish.

Set these grommets with one of the following tools: C.S. Osborne Plain Washer Grommet Setter, C.S. Osborne Grommet Kits or Press-N-Snap Tool.

Punch holes before setting grommets with one of the following tools: C.S. Osborne Drive Hole Punch, C.S. Osborne Revolving Hole Punch or Screw Hole Punch.

Size #00 #0 #1 #2 #3 #4
Diameter of hole when set 3/16" 1/4" 5/16" 3/8" 7/16" 1/2"

 

Finish #00 #0 #1 #2 #3 #4
Brass $5.99 $7.49 $9.49 $12.99 $20.49 $24.99
Nickel $6.49 $8.49 $10.49 $13.99 $22.49 $27.99
Black $6.99 $9.49 $11.49 $14.99 $24.49 $29.99
To order Brass Finish, add to the order cart here:
 
Size  

To order Nickel Finish, add to the order cart here:

 
Size  

To order Black Finish, add to the order cart here:

 
Size  


Shown in Brass Spur Washer

Spur Grommets Finish  
144 heavy gauge washers and grommets per gross. 100% solid brass grommets available in brass and nickel plated.

Set these grommets with one of the following tools: C.S. Osborne Spur Grommet Setter

Punch holes before setting grommets with one of the following tools: C.S. Osborne Drive Hole Punch, C.S. Osborne Revolving Hole Punch or Screw Hole Punch.

Size #0 #1 #2 #3 #4
Diameter of hole when set 9/32" 13/32" 7/16" 8/16" 9/16"
 
Finish #0 #1 #2 #3 #4
Brass Spur $25.99 $29.99 $37.99 $43.99 $56.99
Nickel Spur $27.99 $31.99 $40.99 $47.99 $62.99
To order Brass Finish, add to the order cart here:
 
Size  

To order Nickel Finish, add to the order cart here:

 
Size  


Grommet Refill   
Solid brass grommet refill packages contain two dozen plain washer grommets.  Available in brass or nickel plated brass finishes, please specify.  

NEW! - Refills now available with Black Anodized Finish

Set these grommets with one of the following tools: C.S. Osborne Plain Washer Grommet Setter, C.S. Osborne Grommet Kits or Press-N-Snap Tool.

Punch holes before setting grommets with one of the following tools: C.S. Osborne Drive Hole Punch, C.S. Osborne Revolving Hole Punch or Screw Hole Punch.

Size #00 #0 #1 #2 #3 #4
Diameter of hole when set 3/16" 1/4" 5/16" 3/8" 7/16" 1/2"
Brass $2.49 $2.99 $3.49 $3.99 $6.49 $7.49
Nickel $2.99 $3.49 $3.99 $4.49 $6.99 $7.99
Black $3.49 $3.99 $4.49 $4.99 $7.49 $8.49
 
Finish  
Size  

 

C.S. Osborne Plain Washer Grommet Setter
This is a professional quality grommet setter that will stand up to the test of time.  Hardened steel insures long life for these setters, even in high use commercial applications.

When setting grommets, use a hard surface under the grommet anvil. Our Mini Anvil works great for this application! To enhance the life expectancy of your grommet setter use a rawhide hammer or wooden mallet, not a steel hammer.

Punch holes before setting grommets with one of the following tools: C.S. Osborne Drive Hole Punch, C.S. Osborne Revolving Hole Punch or Screw Hole Punch.

For use with Plain Washer Grommets.

Size #00 #0 #1 #2 #3 #4
Diameter of hole when set 3/16" 1/4" 5/16" 3/8" 7/16" 1/2"
Price $44.99 $45.99 $47.99 $49.99 $57.99 $61.99
 
Size  

 

C.S. Osborne Spur Grommet Setter
This is a professional quality grommet setter that will stand up to the test of time.  Hardened steel insures long life for these setters, even in high use commercial applications.

When setting grommets, use a hard surface under the grommet anvil. Our Mini Anvil works great for this application! To enhance the life expectancy of your grommet setter use a rawhide hammer or wooden mallet, not a steel hammer.

Punch holes before setting grommets with one of the following tools: C.S. Osborne Drive Hole Punch, C.S. Osborne Revolving Hole Punch or Screw Hole Punch.

For use with Spur Washer Grommets.

Size #0 #1 #2 #3 #4
Diameter of hole when set 9/32" 13/32" 7/16" 8/16" 9/16"
Price $45.99 $47.99 $49.99 $57.99 $61.99
 
Size  

 

C.S. Osborne Midget Plain Washer Grommet Setter
This die is perfect for intermediate usage, designed for use where more grommets are going to be set than the C.S. Osborne Grommet Kit but less than the Professional Setters listed above.

When setting grommets, use a hard surface under the grommet anvil. Our Mini Anvil works great for this application! To enhance the life expectancy of your grommet setter use a rawhide hammer or wooden mallet, not a steel hammer.

Punch holes before setting grommets with one of the following tools: C.S. Osborne Drive Hole Punch, C.S. Osborne Belt Punch, C.S. Osborne Revolving Hole Punch or Screw Hole Punch.

For use with Plain Washer Grommets.

Size #00 #0 #1 #2 #3 #4
Diameter of hole when set 3/16" 1/4" 5/16" 3/8" 7/16" 1/2"
Price $14.95 $15.95 $16.95 $17.95 $18.95 $19.95
 
Size  
 

C.S. Osborne Grommet Kits
This kit has everything needed to set grommets, complete with easy to follow instructions. Although this kit is not intended for commercial use, with a name like C.S. Osborne you know it is a quality product that with reasonable care should last an indefinite period. Kit includes grommet die, punch, cutting board and grommets. Sizes zero-zero through one include 48 grommets. Sizes two through four include 24 grommets. Available in brass, nickel plated brass finish or black anodized brass finish.

When setting grommets, use a hard surface under the grommet anvil. Our Mini Anvil works great for this application! To enhance the life expectancy of your grommet setter use a rawhide hammer or wooden mallet, not a steel hammer.

When using the hole punch that comes with this grommet kit, we highly recommend using the Self Healing Cutting Pad. Otherwise it is recommended to use corrugated cardboard on top of of the wooden block provided with kit. This will increase the life expectancy of the hole punch.

Need more grommets? Check out our refill packages!

For use with Plain Washer Grommets.

NEW! - Kits now available with Black Anodized Finish

Size #00 #0 #1 #2 #3 #4
Diameter of hole when set 3/16" 1/4" 5/16" 3/8" 7/16" 1/2"
Brass Kit $16.99 $17.49 $18.49 $19.49 $20.49 $22.49
Nickel Kit $17.49 $17.99 $18.99 $19.99 $20.99 $22.99
Black Kit $18.99 $19.49 $20.49 $21.49 $22.49 $24.49
 
Finish  
Size  

C.S. Osborne Heavy Duty Grommet Kits
A complete and intermediate kit for consumer use. Each kit consists of a midget grommet setter, a belt punch, three dozen brass plain grommets and washers, a small cutting board and complete instructions!

When setting grommets, use a hard surface under the grommet anvil. Our Mini Anvil works great for this application! To enhance the life expectancy of your grommet setter use a rawhide hammer or wooden mallet, not a steel hammer.

When using the hole punch that comes with this grommet kit, we highly recommend using the Self Healing Cutting Pad. Otherwise it is recommended to use corrugated cardboard on top of of the wooden block provided with kit. This will increase the life expectancy of the hole punch.

For use with Plain Washer Grommets.

Size #00 #0 #1 #2 #3 #4
Diameter of hole when set 3/16" 1/4" 5/16" 3/8" 7/16" 1/2"
Brass Kit $24.49 $24.99 $25.99 $26.99 $27.99 $29.99
 
Size  

 

Eyelets   
Eyelets are available in brass, nickel, and black finishes.  They are sold in packages of 200 or 1,000.  Eyelets require the Eyelet Pliers for setting.  3/16" I.D.

Brass or Nickel Plated 200 $8.99/pkg
Black 200 $11.49/pkg
Brass or Nickel Plated 1,000 $29.99/pkg
Black 1,000 $39.99/pkg
Eyelet Pliers    
 
Package  

Press-N-Snap Tool 
This professional quality setting tool comes with snap button, socket, eyelet and stud dies and #1 plain washer grommet dies.  The heat-treated cast aluminum body makes this tool both lightweight and durable.  It is portable, versatile and easy to use.  Capable of setting numerous brands of fasteners.  For availability of other types of dies, email us.

Size: Durable Dots

Make snap setting even easier with Press-N-Snap Bench Mount

$149.95 Each

 

Press-N-Snap Bench Mount
For those who want to use the Press-N-Snap Tool as a bench machine, we offer a bench mount.  It can be mounted either vertically or horizontally on a work bench.

$29.49 Each

 

C.S. Osborne Arch Hole Punch   
This professional quality tool cuts holes for grommets.  The solid heavy-duty construction makes this a great choice. 

This tool should be used with the self healing cutting pad. The use of wooden or rawhide mallet is recommended. Steel hammers are not recommended.

Set grommets with one of the following tools after punching your hole: C.S. Osborne Plain Washer Grommet Setter, CS Osborne Grommet Kits or Press-N-Snap Tool.

Size #00 #0 #1 #2 #3 #4
Diameter of hole when set 3/16" 1/4" 5/16" 3/8" 7/16" 1/2"
Price $22.49 $22.95 $23.49 $23.95 $24.49 $27.95
 
Size  

C.S. Osborne Belt Punch   
Hardened cutting edge and milled clearing hole, this is a cost effective hole punch suitable for consumer use

This tool should be used with the self healing cutting pad. The use of wooden or rawhide mallet is recommended. Steel hammers are not recommended.

Set grommets with one of the following tools after punching your hole: C.S. Osborne Plain Washer Grommet Setter, CS Osborne Grommet Kits or Press-N-Snap Tool.

Size #00 #0 #1 #2 #3 #4
Diameter of hole when set 3/16" 1/4" 5/16" 3/8" 7/16" 1/2"
Price $8.49 $8.99 $9.49 $9.99 $10.49 $10.99
 
Size  

C.S. Osborne Revolving Hole Punch   
This hole punch has six settings that are easily switched so you can make the size hole you need! Tip: if you're having trouble getting the punch to go all the way through the fabric, use corrugated card board behind your fabric.

This tool should be used with the self healing cutting pad

Set grommets with one of the following tools after punching your hole: C.S. Osborne Plain Washer Grommet Setter, Handi Grommet Kits or Press-N-Snap Tool.

Sizes are 3/16", 5/32", 1/8", 7/64", 3/32", 5/64".  

$18.99 each

 

Screw Hole Punch    
This unique hole punch works by pushing down on the molded wooden handle which creates a powerful turning motion to easily cut through many materials.

This tool should be used with the self healing cutting pad

Set grommets with one of the following tools after punching your hole: C.S. Osborne Plain Washer Grommet Setter, Handi Grommet Kits or Press-N-Snap Tool.

Hold sizes are:  5/64", 3/32", 1/8", 5/32" 13/64".  

$31.95 each

 

C.S. Osborne #89.5: Barrel Shaped Hickory Mallet    
When setting snaps or grommets, it is highly recommended to use a wooden or rawhide mallet. The Osborne #89.5 Hickory Mallet is an excellent choice! Made of second growth lacquered hickory, carefully finished and well balanced.

Size No.

Diameter of
face (in)
Length of
head (in)
Length of
handle (in)
Weight
each (oz)
2 1/2     2 3/8 5 1/2 10 1/2 16

$18.99 each

 

C.S. Osborne #196: Rawhide Mallet with Solid Head    
When setting snaps or grommets, it is highly recommended to use a wooden or rawhide mallet. The Osborne #196 Rawhide Mallet with solid head is an excellent choice! The head of this light-weight mallet is made entirely of rolled water buffalo rawhide. Handle is white hickory. It is recommended for many jobs where the user wishes to avoid scaring.

Size No.

Diameter of
face (in)
Length of
head (in)
Weight
each (oz)
1 3/4 3 3/8 8

$36.99 each

 

C.S. Osborne Marking Chalk
This chalk is clay based and thus it is much easier to erase. Also works on glass and vinyl that other chalks do not. Due to the shape of this chalk a sharp marking edge is maintained.
Box of 12 contains : 8 white, 2 yellow, 1 red, 1 blue

$12.95 each

 

Common Sense Eyelet Hole Punch
One of the hardest parts of using common sense fasteners is cutting the oblong hole and the four holes for the prong to fit through.  This punch does all of it at one time.  A great way to save time and frustration.  This tool should be used with the self healing cutting pad below. To enhance the life expectancy of your tool use a rawhide hammer or wooden mallet, not a steel hammer.

$55.99 each

 

Self Healing Cutting Pad
Now available in two sizes! This cutting pad is a must for using punch type hole cutters.  Made of resilient vinyl plastic, these tough cutting pads allow the cutting die to easily cut through the fabric and into the pad.  Should be used on a solid base like the Mini Anvil below.

3.5" x 3.5" x .25" $7.49 ea
10" x 10" x .5" $29.99 ea
 
Size  

Mini Anvil
For the best results when setting snaps, grommets or using cutting tools, a steel surface should be used to pound on.  If space is a problem, the Mini Anvil is the answer.  5.5" long x 3.5" tall.

$14.95 each

 

Don't forget to Add us to your Favorites!

Outerwear Patterns Grommets Sunbrella Marine Fabric Water Resistant Fabric Sunbrella Marine Fabric Outdoor Fabrics Sunbrella